Manufacturing

How your camper
actually gets built.

Aluminum forming, welding, and powder coating happen overseas. Everything after that happens in Monroe, Washington, by the same people who answer the phone when you call.

Fabrication

OVERSEAS PARTNER

Forming, welding, and powder coating of the camper shells, plus the interior components, built to our designs for each truck.

Assembly & upfit

MONROE, WA

Assembly, sealing, wiring, hardware, and options, done here.

Warranty

2 YEARS

2 years on the built-in systems we install, handled in the US. Branded appliances are covered by their makers.

Spare parts

STOCKED

Panels, latches, struts, seals, and canvas, shipped from Washington.

No mystery about it

Yes, our camper shells and interior components are made overseas.

The aluminum structure and the pop-up tent metal are bent, formed, welded, and powder coated by our overseas fabrication partner. We say that plainly, on the page, instead of burying it.

What arrives in Monroe is a set of finished components, not a finished camper. Assembly, weatherstripping and sealing, and every piece of hardware, wiring, and accessory happen here, on our floor, before it goes on your truck.

Working with our overseas fabrication partners allows us to source the shells and interior components efficiently, while keeping final assembly, outfitting, quality oversight, and customer support with our team here in Washington.

Crated Frontier and Summit components arriving at the Cascadia Overland shop in Monroe, Washington
Monroe, WA · Receiving

Frontier & Summit

Fully assembled at our shop.

Unless you choose our Disassembled Shipment option, which ships straight to you in two crates for you to assemble.

The crates hold finished powder-coated panels and tent assemblies. That is where the factory’s job ends and ours starts.

Every clamp-on camper is assembled from flat components on our floor. Nothing arrives as a finished camper waiting to be wheeled outside.

  • Structural assemblyPanels and tent assembly bolted and riveted together, squared, and torqued to our build standard.
  • HardwareEvery nut, bolt, hinge, and latch installed and adjusted by us.
  • SystemsFan, solar, wiring, and accessory mounting, installed and tested before it leaves.
  • SealingWeatherstripping between every panel joint, then sealing and a water check.
Eddy, a Cascadia Overland founder, assembling a Frontier camper in the Monroe shop
Eddy, one of our founders, building a Frontier
Multiple campers under construction inside the Cascadia Overland shop

Several builds running at once on the shop floor.

Side profile rendering of the Cascadia Overland Summit camper

Summit side profile, from our own drawings.

Apex

A welded monocoque, finished here.

The Apex shell is welded, so it arrives as a structure rather than a stack of panels.

What leaves is a finished camper on premium components we chose and installed ourselves.

  • Electrical end-points finalized, terminated, and tested
  • Eberspacher diesel air and water heating components
  • Dometic appliances and Renogy power gear
  • Breakers, fuses, distribution, and battery installed to our spec
  • Structural inspection, sealing, water test, and torque verification
John, a Cascadia Overland founder, finishing the build inside an Apex camper
John, one of our founders, finishing an Apex interior

Walkaround of a raw Apex shell mid-build, before powder coating.

Powder-coated Apex shell with the build checklist posted, before interior installation

The same shell after powder coating, checklist posted, interior not yet installed. Every unit is built to a checklist and signed off against it.

Design decision

Why the clamp-on campers are bolted, not welded.

By choice. It does reduce shipping and import cost, but that is the smaller half of the reason.

  1. 01

    Damage stays local

    Catch a rock or a tree on a fully welded canopy and you are replacing the entire structure. Bolted panels mean the damaged panel comes off and a new one goes on.

  2. 02

    The canopy is allowed to move

    Weatherstripping between each panel lets the canopy flex slightly under load. A fully rigid welded box has nowhere to put that stress, so over time it finds a weld or a corner to crack.

  3. 03

    We build it the way we would repair it

    We are fabricators and welders by trade with over fifteen years of manufacturing behind us. Welding it all together is the easy path. Designing it to come apart is the useful one.

Modular by design

  • Tent canvas damaged?It zips on. We replace the canvas, not the camper.
  • Panel damaged?It is bolted on. Single panel replacement, no full teardown.
  • Hinge or latch worn out?Standard hardware, generic replacement, available here.
  • Weatherstripping tired?Generic profile, easy to source and swap.
  • New truck, different bed?The canopy may not carry over, but Frontier and Summit tent dimensions are standardized, so we can replace the canopy panels and reuse the pop-up. The Apex is more vehicle-specific, though we can build one to fit multiple trucks.

Design & R&D

We scan, model, and prototype before anything gets cut.

Fitment work happens in CAD against a 3D scan of the actual vehicle, not a tape measure and a guess.

The same process drives every upgrade we roll out: exterior MOLLE panels, mounting standardization, revised hardware, and fitment for trucks nobody else builds for.

3D scan of a first generation 4Runner with Frontier camper CAD fitted, angle one


01 / 04

CAD, then the real thing.

Same truck, same camper. What we modeled against the scan on the left, built and mounted on the right.

Frontier camper CAD model fitted to a 3D scan of a first generation 4Runner

Frontier CAD on the 3D-scanned 4Runner.

Frontier camper mounted on a first generation 4Runner during prototype testing

The finished prototype on the truck.

Dimensioned, not approximated

CAD interior dimension drawing for the Apex camper on a 6.5 foot Silverado bed

Apex interior dimensions, 6.5 ft Silverado bed.

CAD exterior dimension drawing for the Apex camper

Apex exterior envelope, published so you can check it against your rig.

Overhead CAD render of the Apex camper interior layout

Overhead render of the Apex interior. Layout is settled in CAD long before it is settled in aluminum.

Straight answers

The questions people actually ask.

Is this just a rebadged overseas camper?

Ours will look familiar next to other aluminum campers, because aluminum campers share a shape. What differs is underneath: our own design revisions, our hardware choices, our sealing standard, and dozens of small tweaks per unit that we make here. The structure is fabricated to our spec. The camper is assembled and finished by us.

At your price I might as well buy American made.

Compare carefully, and ask any builder the same question you asked us: which parts are fabricated here, and which are sourced. Plenty of aluminum campers on the market are assembled in the US from overseas components, which is what we do. We would rather tell you that up front than let you find out later.

What is not in question: your purchase supports a US business and the people working in our shop. We assemble, finish, and back these campers in Washington.

Who honors the warranty?

We do, for two years on the built-in systems we install, from Monroe. Branded appliances and the battery are covered by their makers, and we help you with those claims. No overseas claim process and no middleman. The team that signed off on your camper is the team that fixes it.

Read the warranty policy

Can I still get parts in five years?

That is the reason for the modular design. Panels, latches, hinges, struts, weatherstripping, and canvas are all individually replaceable, and we stock components here rather than ordering them per claim.

Can you build for an unusual truck?

Often, yes. Send us the vehicle and what you want to do with it. If it is a fitment we have not scanned before, that is a conversation about timing, not a no.

Talk to us about a build

Monroe, Washington

Assembled here, backed here.

If you want to see the shop, come see the shop. We are open Monday through Friday and we will show you a camper mid-build.